Finishing & support services

Services pushing your innovations for tomorrow’s successful products

If you have your own materials or when you are finishing up the project and deciding in what form you need the product in we have the options for it.

Equipment and methods ranging from drying, roughing, milling, packing, mixing, heating, cooling, storing, improving shelf life or press materials.

Be in contact without any hesitation

Drying services
Drying of material in mild or aggressive conditions, with pressure or heat or air
Tailored drying to certain DMC
Possibility to dry without promoting hornification
Inhouse laboratory analytics
Drying equipment
Oven(s) in pilot and laboratory scale
Fluidized bed drier (small-scale)
Twin-screw drying with indirect heating, continuous air drying, 10-50 kg/h
Steam/ventilated air drying cabinet, 2 m3
Paper machine, up to 1000 kg/water removed per hour (equals to tons of dried material per day), continuous

Pelletizing fractionated materials with different sieve-sizes
Crushing and drying combined with pelletizing
Inhous laboratory analytics
Equipment
Sieve options of 6 and 8 mm (also other sizes per request)
Several different pelletizing machines in different sizes and capacities with different pressure profiles

Extrusion of polymers, fillers, fibers and compounding and blending
Testing e.g. fiber & polymer blends, compoundability, operability of certain mixtures
Equipment:
Single screw extruder with 6 heazing zones
Diameter 45 mm, length 1350 mm, nozzle 3 mm
Output up to 90 kg/h
Water bath cooling and cutting of extrudate

Services
Batch or continuous
Equipment
Continuous counter-current washing of particulate materials with option to heat, 10-50 kg/h
Batch washing by dilution / concentration cycles, tank volumes ranging from 0.1-10 m3, combined with wire- or screw press
Washing liquid collection and concentration option, e.g. nanofiltration or evaporation